All profile components used in the system are ALUMINUM.

Aluminum profiles used in the system are 6063 – T6 F25 (7580 Briner Hardness).

The most important feature of the system is that the lamellas are corrugated inside so that dust, water etc. on the upper part do not spill down during the movement of the lamellas.

The system can be mounted flat or inclined when necessary. Since it has grooves on 4 sides, water intake is prevented without any inclination. Water is discharged from the front foot profiles. The panels work axially and have the ability to retract when desired. (This feature is important in terms of making ventilation and shading at the same time) Since the aluminum lamellas used in the system cause darkness in the space, lighting is provided by using a glass panel. ( Optional.)

Metal accessories are first galvanized and then electrostatic oven painted. Lamels move comfortably and silently with the help of 628 ZZ stainless bearings.

Panels should be able to be opened at a minimum angle of 100 degrees axially. (Important to block the sunlight from the facade) The opening-closing movement of the ceiling cover can be used with the remote control and optional android or apple control. (optionally rain, sun and wind sensors provide 4-season comfort.

All aluminum profiles are painted with electrostatic powder coating technology. It moves with the T-10 timing belt between the engine and the moving mechanism.

Screws used in the system are chrome stainless. Flange application screws must be M8*80 jacketed steel dowels and galvanized coating. (In order not to damage the floor insulation)

The wicks to be used in the system are resistant to EPDM heat.

20 Dens of styrofoam foam is used within the lamellas for thermal insulation (optional and sealed adhesive is used in water insulation.)

The system to be used has 2 (two) years of engine and 2 years of mechanical warranty.

Each system module consists of vertical and horizontal carrier profiles, vertical main carriers should be 128*170*3mm and horizontal main carriers 128*170*3 mm.

System modules have static properties to meet 50kg+25kg /m² distributed load and 50kg/m² wind load.

Night lighting is provided with the hidden LED application on 4 sides of the system. With the dimmer light receiver, the power can be increased or decreased.